Luxury EV Charger Installation for a Detached Home in Crewe
When our customer in Crewe, Cheshire purchased their first electric vehicle, they wanted more than just an EV charger, they wanted a premium installation that complemented the appearance of their beautiful, detached home.
After discussing several charger options, they chose the Andersen Quartz Tethered EV Charger with a Cotswold Oak front and Nova Bronze finish. The combination perfectly matched the property’s existing timber features and offered the premium look they were hoping for without compromising on smart charging technology.
As an Andersen Premier Partner, we were able to guide the customer through the available finishes and help them select a charger that looked as though it had always been part of the property.
The Customer’s Requirements:
Every installation starts with understanding exactly what the customer wants.
For this project, their priorities were:
– Their first home EV charger
– A premium finish that complemented the property
– Minimal visible cable along the cable route at the front of the property.
– Smart charging with compatibility for off-peak electricity tariffs
– A neat, professional installation that preserved the appearance of their home
Rather than simply fitting a charger, the goal was to create an installation that blended seamlessly into the property while remaining fully future-ready.
The Challenge:
Although the installation was straightforward from an electrical perspective, achieving the premium finish the customer wanted required careful planning.
The preferred charger location was inside the garage, approximately 15 metres from the electricity supply. The most practical cable route meant running externally across the front of the property, but the customer was keen to avoid visible cabling that would detract from the appearance of their beautifully maintained detached home.
Fortunately, a row of large decorative planters already positioned along the front of the property offered an opportunity to conceal much of the cable route. However, one significant challenge remained; crossing the main entrance. A surface-mounted cable across the doorway or routing above the entrance would have been visually intrusive and wouldn’t have met the high standard of finish the customer was looking for.
Our Professional Solution:
To achieve a discreet, premium finish, we carefully planned the installation around the property’s existing features.
Approximately 15 metres of 6mm² EV Ultra cable with steel wired armour (SWA) was installed where appropriate for the cable route. By routing the cable low along the front of the property, over 90% of the installation was concealed behind the existing planters, leaving very little visible cabling.
To cross the front entrance, we carefully cut a narrow channel into the paving using a diamond blade before installing the cable beneath the surface. The paving was then reinstated using a colour-matched grout, creating a finish that blended seamlessly with the existing pathway and gave the appearance that the installation had always been part of the property.
We also installed a dedicated external EV consumer unit neatly alongside the existing meter boxes and integrated dynamic load management using a CT clamp to help protect the property’s electrical supply.
Finally, the installation was fully tested, commissioned and certified before demonstrating the charger and app to the customer.
Why We Recommended the Andersen Quartz:
For this property, aesthetics mattered just as much as functionality. The Andersen Quartz was the perfect choice because it combines premium materials with smart charging technology and an extensive range of finishes.
The Cotswold Oak front and Nova Bronze body complemented the property’s existing timber detailing beautifully, creating a charger that enhanced rather than distracted from the home’s appearance. The integrated cable management also helped maintain the clean, uncluttered finish inside the garage.
The Finished Result:
The completed installation achieved exactly what the customer had hoped for. The cable route is almost completely hidden, the external consumer unit sits discreetly alongside the existing electrical equipment, and the Andersen charger looks perfectly at home within the garage.
By taking the extra time to conceal the cable beneath the entrance paving and carefully planning the installation route, we delivered a premium finish that reflects both the quality of the property and the quality of the charger. The customer was delighted with the result and commented that the workmanship exceeded their expectations.
What Our Customer Had to Say:
★★★★★
“We had an Andersen Quartz EV charger fitted by Electrics and More. From the first enquiry to the finished installation, the workmanship and information provided throughout the day was superb. The finished job was so professional and gives me full confidence to recommend this company to anybody looking for an EV charger or anything else electrical. Our installer was Victor who was brilliant.”
– Kay W, Verified Google Review
Installation Summary:
Location: Crewe, Cheshire
Property Type: Detached House
EV Charger: Andersen Quartz Tethered (5.5m)
Finish: Cotswold Oak Front with Nova Bronze Body
Cable Route: Approximately 15 metres using 6mm² EV Ultra cable SWA
Additional Work: Dedicated EV consumer unit, Dynamic load management (CT clamp), Concealed cable routing, Under-door paving channel with matching grout
Full testing and certification
Installation Time: Approximately 5 hours
Frequently Asked Questions
Can EV charger cables be hidden?
– Yes. Every property is different, but we always look for the neatest possible cable route while ensuring the installation complies with current electrical regulations.
Why choose an Andersen Quartz charger?
– The Andersen Quartz combines premium design, customisable finishes, integrated cable management in the A2 and A3 models and smart charging features, making it an excellent choice for homeowners who want both performance and appearance.
Do I need a dedicated EV consumer unit?
– Many installations require a dedicated EV consumer unit to provide appropriate protection for the charging circuit. We’ll assess your existing electrical installation and recommend the safest solution.
Can you install an EV charger in a garage?
– Absolutely. Installing a charger inside a garage helps protect it from the weather while providing a clean and practical charging location.
Why choose an Andersen’s aluminium body over a plastic charger?
– The Andersen charger range features a powder-coated aluminium body, offering excellent durability and natural resistance to long-term UV exposure. Plastic chargers are durable too, but aluminium provides a more robust, premium finish that’s built to look great for years to come.
Looking for an Andersen EV Charger Installer in Crewe?
Whether you’re purchasing your first electric vehicle or upgrading your existing charger, Electrics and More provides professional EV charger installations across Crewe, Cheshire, Nantwich, Sandbach, Alsager, Middlewich, Stoke-on-Trent and the surrounding areas.
As an Andersen Premier Partner, we can help you choose the perfect finish for your home, recommend the right charger for your needs and deliver a neat, professional installation that you’ll be proud to show off.
Contact Electrics and More today for expert advice and quotation.
